LDperformance Racing Dash2 can display realtime data from Ecumaster classic using the serial port. An adapter cable is supplied.
Connection with Ecumaster Black is done using the CAN bus. This means two wires – CANH and CANL need to be connected to the corresponding terminals on the Racing DASH2 preferably using a twisted pair cable.
CANL – B25
CANH – B12
EMU Classic Software configuration
Simply choose Ecumaster serial protocol from the list as shown below:
EMU Black Software configuration
Software configuration on Racing DASH2
Connect the Racing Dash2 to a windows laptop using a USB to Serial adapter cable (not supplied)
Run the Configuration Software available from here.
Drag and drop parameters from the right “Data from ECU” to any position on the dash. Press Save to keep settings.