The Emerald ECU outputs live data through CAN bus. It is compatible with LDperformance racing Dash2.
CAN High and CAN Low wires must be connected to the corresponding CANH and CANL wires on the Racing DASH2 preferably using a twisted pair cable.
Emerald Software configuration
Connect to the emerald ecu and go to “ECU Configuration” – “CAN Datalink”.
Choose “Emerald-Generic” Press “ECU” – “Update ECU configuration”
Software configuration on Racing DASH2
Connect the Racing Dash2 to a windows laptop using a USB to Serial adapter cable (not supplied).
Run the Configuration Software available from here.
Drag and drop parameters from the right “Data from ECU” to any position on the dash.
Not all parameters are available for all ECUs.
Press Save to keep settings.